Bookmark and Share

Vinyl Pergola Accessories

Just bought a Pergola? Check below for optional accessories for your new pergola.

Bolt Down Bracket System (4pc) $99.99

va80205_boltdownbracket1_1024x1024.jpg

If you are mounting your pergola to a wood deck or cement patio, the Pergola Bolt-Down Bracket System makes it easy! Simply measure your footprint and bolt the brackets into place. Insert 4 x 4 pressure treated wood posts (purchased separately) into the brackets and screw them in place. Slide your pergola posts over the wood posts, and screw the pergola posts into the wood. The result is a lasting installation that is safe and rigid. This mounting system was specifically designed for New England Arbors brand Pergolas. The manufacturer highly recommends that if you installing any of these vinyl pergolas to a flat surface, that you purchase this kit. The mounting system comes with 4 brackets and 16 1.5” Self Tapping Screws to fasten wood posts to Steel Post Brackets.

Important Note: DO NOT use the bolt down bracket system for installing the pergola over concrete pavers, patio stones, or interlocking bricks

Please note: Extra Materials Required

Depending on the type of installation, you will be required to purchase the following hardware:.

If mounting Pergola onto an existing concrete surface:

• 1/4” x 2 3/4” Cement Screws - Countersunk head (12)

• 3/16” Concrete drill bit. Minimum 3” long (1)

• 4x4x ?* pressure treated wood posts if using for a pergola (4) 

*(length depends on the pergola selected)

1/2” x 3 1/2“ x 12” long wood shims to “build out” posts (32)

 

If mounting Pergola onto a wooden or composite deck with AN ACCESSIBLE UNDERSIDE:

• 1/4” x ?” Bolts and nuts - Countersunk Head (12)

• 1/4” Washers (12) (length depends on blocking material)

• 1/4” Wood drill bit. Minimum 3” long (1)

• 4x4x ?* pressure treated wood posts if using for a pergola (4)

*(length depends on the pergola selected)

 1/2” x 3 1/2“ x 12” long wood shims to “build out” posts (32)

Tall Base Moldings - 4 PK

TALLBM_1024x1024.jpgTall_Base_Moldingsjpg_1024x1024.jpg

                White Vinyl                             Composite

Add a decorative element to any pergola with tall base moldings, that add an 36 inch decorative “boot” to the bottom of your pergola posts. Made from the same maintenance free vinyl, the tall base moldings slide over the bottom of the 5x5 pergola post.

Flat Privacy Wall

VA42026_10__Flat_Privacy_Wall_Square_424x424_1024x1024.jpg

If you want your pergola to offer some privacy, then the Pergola Privacy Screens are for you.

They are as beautiful as they are functional and are crafted from weather-resistant vinyl to provide a lasting solution. Each panel comes with a middle post and two sections to make a complete wall for one side of your pergola. You can affix up to three privacy panels to your pergola, depending on your desired level of privacy. The Privacy Screen comes with couplers to secure into the posts of the pergola. These couplers host the privacy screen beams, so installation is simple and flexible.

Curved Privacy Panel $599.99

VA42013_PrivacyWallLifestyle3_1024x1024.jpg

If you want your pergola to offer some privacy, then the Pergola Privacy Fence Panels are for you.

The privacy panels are designed to fit the Bellagio Pergola and the Venetian Pergola.

They are as beautiful as they are functional and are crafted from weather-resistant vinyl to provide a lasting solution. Each panel comes with a middle post and two sections to make a complete wall for one side of your pergola.

You can affix up to three privacy panels to your pergola, depending on your desired level of privacy. The Privacy Panel comes with couplers which get screwed into the posts of the pergola. These couplers host the privacy panel beams, so installation is simple and flexible. The Privacy Panel is designed to fit a 110 in. opening. At the highest point, it is 70-3/4 in. high and the center post is 5 in.

Best of all: we cover this privacy panel with our industry-first lifetime warranty.